The SkyLock
The SkyLock is an overspeed safety device. The Sky Lock is used in combination with Sky Climber hoists and acts on the secondary safety rope. It acts as a safety brake in emergency situations “ : breaking of a suspension rope or failure of hoist or motor. The sky Lock can be mounted on the hoist or on the end - or walk through strirrup (recommended).
The Sky Grip
The Sky Grip (CE-approved) 8 – 9 – 10.2 mm is a breakthrough in the field of safety brake devices as it not only senses slack rope, but also functions as a mechanical anti-tilting device. The Sky Grip automatically resets after it has been activated and brought in operation again. 
Installed on a platform with two hoists, the Sky Grip covers the risk of failure of the suspension rope, no load condition of the suspension rope and an inclination of the platform of more than 10 degrees.
The Sky Grip fall arrest safety device is fully compatible with the entire range of existing Sky Climber rigging hoists. The Sky Grip does not require any special brackets when used in combination with an over/underload or safety device.
The Sky Grip grips on the secondary rope in case of the following conditions:
- Slack rope of the suspension rope.
- Inclination of the platform compared to the suspension rope.
Installed on a platform with two hoists it covers the risk of:
- Failure of the suspension rope.
- No load condition of the suspension rope.
- An inclination of more than 10 degrees of the platform.
